Extra Accessories For 110V 8*16mm Vivid Single Color Neon Rope Light

Package Contains: Power cord with plug*3+Pin*3+End cap*3+Heat shrink tube*31. Please pay attention to disconnect power first. 2. Cut the length you needs by follow the cut mark shows on the neon rope. 3. The sharp prongs of the pin should be in the same direction with the → mark shows on the neon rope. 4. Insert the round prongs of the pin into the power cord. 5. Plug the power cord into an outlet to test the neon rope and make sure it works. NOTE: Please note that the waterproof performance of any light strip will be reduced after cutting. If installed outdoors, the connector part and the end cap need to be filled with glue and then sealed with heat shrink tube. Glue is not included in this set. Compatibility & Contents--Only suitable for GZBtech 110-120V 0.31''x0.63 VIVID single color neon rope Light（NOT for RGB neon). Package Contains: Connector with cable*3, pin*3, pins *3, end cap*3, heat shrink tube*3. Please note that the waterproof performance of any light strip will be reduced after cutting. Glue is not included in this set. 4.92FT Power Cord with Plug-- If you need to cut your neon rope to use in different spaces, the cut new neon rope needs an extra power cord plug to work, and the other end of the neon rope needs to be protected by the end cap. Our customer service team would be more than happy to assist you fix your issue within 24 hours.